0.40 ct E SI1 held by tension alone, 18K yellow gold
A GIA-certified round brilliant of 0.40 carat, colour E, clarity SI1, suspended between the two ends of an 18K yellow gold shank with no claws, no rim and no metal above the girdle. Report 1515649974.
What is actually holding the stone
Nothing is gripping it from above. The band is made slightly too short for the diamond and then sprung open to receive it, so the metal is under permanent load and is trying to close. Two small seats are cut into the facing ends, the girdle sits in them, and the spring force of the gold does the rest. The stone is a structural component: take it out and the ring closes.
That requires a harder alloy and far tighter tolerances than a claw setting. The seats have to match the girdle within a fraction of a millimetre — too shallow and the stone can shift, too deep and you have removed the very edge you are relying on. It is one of the few settings where the goldsmith’s accuracy, not the design, is what you are buying.
The optical payoff
Because almost no metal touches the diamond, light reaches it from every direction — through the table, through the crown, and straight through the open sides of the pavilion. A claw setting blocks some of that; a bezel blocks most of it. This is the maximum-light setting, and at 0.40 ct that matters: a smaller stone has less depth to work with, so the extra light entering from the sides does proportionally more.
It is also why the diamond appears to float. There is no visible support, so nothing frames it and nothing competes with it.
Sizing: read this before ordering
A tension ring cannot be resized the way an ordinary band can. The circumference is the mechanism — changing it changes the spring load that holds the stone. Altering one of these means re-tensioning the shank and re-cutting the seats, which is workshop work rather than a routine adjustment.
So tell us the finger size before we make it. If you are not certain of the size, this is the one design where guessing is a genuinely bad idea, and we would rather steer you to a plain shank than sell you a ring you cannot easily change.
Specification
- Centre stone: natural diamond, round brilliant, 0.40 ct, colour E, clarity SI1
- Certificate: GIA 1515649974
- Setting: tension, 18K yellow gold
The opposite extreme
If minimum metal is the wrong answer for your hands, the 0.40 ct E SI1 bezel set ring in 18K white gold takes the same stone and wraps it completely — maximum protection, least light. Between those two sit every other setting in engagement rings.
Buying from Antwerp
In stock at our workshop in the Antwerp diamond district. Shipped insured, boxed, with the GIA report.




